渗水地膜与旱地农业

经过对地膜物料结构的深入研究，提出了单向渗水原理，设计并发明了渗水地膜。渗水地膜具有保温、调温、渗水、保水、微通气等多种功能，可使半干旱地区发生频率为７０％左右、年累计量为１００～１５０ｍｍ的小雨量资源得到开发利用。旱地试验表明：渗水地膜覆盖的粮食作物比常规地膜覆盖的增产１５７％～３８３％，比无覆盖的增产１倍以上。     

中国废旧农用塑料薄膜的回收与利用

介绍了中国废旧农用塑料薄膜回收利用的现状 ;重点阐述了中国废旧农膜再生造粒技术 ,从工艺、成本利益、再生粒料的应用市场等各方面对该技术进行了详细的介绍和剖析 ,在论述其优越性的同时 ,指出了再生造粒技术存在的问题 ,为研究人员今后的研究工作指明了方向 ;最后对废旧农膜再生造粒技术的应用前景进行了展望。     

大学校园中影视艺术教育的社会责任

影视艺术教育是对大学生进行综合素质教育的重要组成部分。作为旨在提高学生艺术素质的影视艺术教育,肩负着重要的社会责任,包括对影视艺术形式本身传承和发展的责任、历史教育和现实教育的责任、道德教育的责任、传承民族文化精粹的责任、展示科技发展水平的责任等。     

阴极极化对金属电极表面微生物膜的影响

阴极极化对不锈钢表面微生物膜的附着有一定的影响,通过 荧光显微镜记数和细菌双染色方法(AO+PI),对在不同电位下极 化过的不锈钢表面进行了观察,同时做了对比实验。实验证明在一 定的范围内(-800mV~-1000mV),阴极极化对微生物向洁净金属 表面的附着有一定的抑制作用,但是对已经附着的微生物膜不能 够起到脱除或完全杀灭作用,只能杀死靠近金属表面的微生物。通 过模拟膜实验,从侧面证明了只有微生物膜附着而无生物活性时, 钝性金属的开路电位不会发生正移。     

生物膜MBR反应器和MBR反应器处理洗涤废水比较

比较生物膜MBR反应器和MBR反应器处理洗涤废水的效果。结果表明,两个系统对COD、LAS及氨氮的去除均具有良好的处理效果。和MBR反应器相比,生物膜MBR反应器的运行条件要好。生物膜MBR反应器的运行条件:水力停留时间(HRT)4～4.5h,气水比351∶,而MBR反应器的运行条件:水力停留时间(HRT)9～10h,气水比451∶。通过两个反应器抗冲击负荷实验的研究,结果表明,在进水水质相同的条件下,就膜生物反应器的上清液而言,生物膜MBR反应器具有更好的抗冲击负荷能力。     

多孔氧化铝层制备的研究

采用预腐蚀与交流腐蚀相结合的方法．研究了多孔氧化铝层的制备工艺．探讨了制备工艺中各步骤的作用以及影响因素。利用扫描电镜，研究了多孔氧化铝层制备工艺对铝箔微观形貌的影响。研究表明．交流腐蚀工艺对铝箔表面微观形貌的改变作用最明显。一次后处理后铝箔表面蚀孔变密．氧化膜的结构更加疏松细腻。二次后处理，调整和热处理等步骤对铝箔表面的微观形貌影响不大。     

瓷砖釉面TiO2薄层对甲基橙的光催化降解

采用溶胶-凝胶法，在瓷砖釉面上制备了良好光催化活性TiO2薄层材料，研究结果表明瓷砖釉面TiO2薄层材料对甲基橙的光催化反应遵循一级动力学规律，光催化降解率与液层厚度符合指数关系。在太阳光照射下，釉面瓷砖TiO2薄层材料能对甲基橙有效地降解。     

The influence of degree of substitution on blend miscibility and biodegradation of cellulose acetate blends

In this account, we report our findings on blends of cellulose acetate having a degree of substitution (DS) of 2.49 (CA2.5) with a cellulose acetate having a DS of 2.06 (CA2.0). This blend system was examined over the composition range of 0–100% CA2.0 employing both solvent casting of films (no plasticizer) and thermal processing (melt-compressed films and injection molding) using poly(ethylene glycol) as a common plasticizer. All thermally processed blends were optically clear and showed no loss in optical quality after storage for several months. Thermal analysis and measurement of physical properties indicate that blends in the middle composition range are partially miscible, while those at the ends of the composition range are miscible. We suggest that the miscibility of these cellulose acetate blends is influenced primarily by the monomer composition of the copolymers. Bench-scale simulated municipal composting confirmed the biodestructability of these blends and indicated that incorporation of a plasticizer accelerated the composting rates of the blends.In vitro aerobic biodegradation testing involving radiochemical labeling conclusively demonstrated that both the lower DS CA2.0 and the plasticizer significantly enhanced the biodegradation of the more highly substituted CA2.5.While this work was in progress, Robert Gardner was struck with cancer and died on June 6, 1995. This paper is dedicated to his memory and to his contributions as a friend and colleague.     

Starch- polyvinyl alcohol crosslinked film— performance and biodegradation

Starch-PVOH cast films were prepared with and without crosslinking agent (hexamethoxymethylmelamine) in the absence of plasticizer. Moisture absorption in films without crosslinking agent at a low relative humidity was similar to that of PVOH and increased as the relative humidity increased. Films with crosslinking agent showed moisture absorption linearly proportional to the relative humidity. Significant improvement in resistance to water disintegration for crosslinked starch-PVOH films was observed. While the tensile strength decreased with increased relative humidity, crosslinking significantly improved the tensile strength. Increased PVOH content improved elongation of films even when the relative humidity was 80% or higher. Biodegradation studies revealed that the degradation rate was negatively correlated with the PVOH content in films and crosslinking generated more converged degradation curves. Names are necessary to report factually on available data; however, the USDA neither guarantees nor warrants the standard of the product, and the use of the name by USDA implies no approval of the product to the exclusion of others that may also be suitable.     

活性炭膜处理工业废水的试验研究

将活性炭膜与常规弹性材料同时作为生物接触氧化处理工艺的填料,分别加装在相同条件的两套接触氧化池中,采用生物接触氧化处理工艺,在同样的条件下处理工业废水,经过对试验数据的对比分析得出:以活性炭膜为填料,处理废水的能力更强,净化效果更好。